-
metal bellows. When made of metal, the
sylphon shape was
formerly created by
metal spinning onto a
metal mandrel (model), and now by
hydrostatic forming...
-
Sealol introduced the edge
welded metal bellows seal. Previously,
metal bellows seals had used a
formed bellows which was much
thicker and stiffer. In...
-
towers by
steam pumps. When dock
machinery required hydraulic power, the
hydrostatic head of the water's
height above ground provided the
necessary pressure...
- in
hydrostatic pressure caused by a
difference in
depth between lung and counterlung, but can be
modified by
ballasting the
moving side of a
bellows counterlung...
- the
system than
hydrostatic gauges. The
pressure sensing element may be a
Bourdon tube, a diaphragm, a capsule, or a set of
bellows,
which will change...
- an aerometer, a
hydrostatic bellows, a
balance and
steam pump,
several table-top
fountains all were used to look into
hydrostatic pressure, and capillary...
-
attached to a
stick (shaft)
usually made of wood or plastic. A
different bellows-like
design also exists,
usually constructed of plastic.
Alternate names...
-
there will
typically be. The
fluid pressures on both
sides include the
hydrostatic pressure,
which is
pressure due to the
weight from the
height of fluid...
-
outlet tube; as the
bubbles rise
within the tube they
cause a drop in the
hydrostatic pressure behind them,
causing the
fluid to be
pulled up. Gas
lifts are...
- the
pressure in a vacuum,
depending on what
range of
vacuum is needed.
Hydrostatic gauges (such as the
mercury column manometer)
consist of a
vertical column...