-
electrospinning Wire
electrospinning Bubble electrospinning Ball
electrospinning High
speed electrospinning Plate edge
electrospinning Bowl
electrospinning Hollow tube...
- nanofibers,
including drawing,
electrospinning, self-****embly,
template synthesis, and thermal-induced
phase separation.
Electrospinning is the most
commonly used...
- filtration. In general,
electrospinning can be
performed using either polymer melts or
polymer solutions. However, melt
electrospinning is
distinct in that...
-
Roller Electrospinning system a
method for
producing nanofibres was
developed by
Jirsak et al.. This
method is
known under the name
Nanospider from Elmarco...
- The
spinning solution then
undergoes dry, wet, dry-jet wet, gel, or
electrospinning techniques. A
spinning solution consisting of
polymer and a volatile...
-
specialized nanofabrics became a
subject of
interest after the sol-gel and
electrospinning techniques were
fully developed in the 1980s.
Since 2000, dramatic...
- applications, and
tissue engineering. For example, with the use of
electrospinning, the
flexible nature of PDS
allows the
control of its
structure and...
-
alternating current electrospinning is that
multiple times higher productivities are
achievable compared to
widely used
direct current electrospinning setups. Kessick...
-
solid or
hollow fibers can be formed.
Spinnerets are also used for
electrospinning and
electrospraying applications. They are
sometimes called coaxial...
- A
Taylor cone
refers to the cone
observed in
electrospinning,
electrospraying and
hydrodynamic spray processes from
which a jet of
charged particles emanates...
