Definition of Planer centers. Meaning of Planer centers. Synonyms of Planer centers
Here you will find one or more explanations in English for the word Planer centers. Also in the bottom left of the page several parts of wikipedia pages related to the word Planer centers and, of course, Planer centers synonyms and on the right images related to the word Planer centers.
Definition of Planer centers
Planer centersPlaner Plan"er, n.
1. One who, or that which, planes; a planing machine; esp., a
machine for planing wood or metals.
2. (Print.) A wooden block used for forcing down the type in
a form, and making the surface even. --Hansard.
Planer centers. See under Center. Planer centersCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
(b) The fixed point of reference in polar co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid.
Meaning of Planer centers from wikipedia
(/ˈsædʒɪtəl/), or longitudinal plane
, is an anatomical plane which divides
the body into right
and left parts. The plane
may be in the center
is used. When powered
to the breadth
of a board
or panel, the tool may be called
a thickness planer
or planer which
- The astral plane
, also called
world, is a plane
of existence postulated
by cl****ical (particularly neo-Platonic), medieval, oriental, and esoteric...
must be centered
on the optical
axis for this to work as indicated. Using
a sufficiently small aperture
in the focal plane
will make the lens...
of the centers
of a m****ive body (host) and of an orbiting celestial
body at two different
times/points of its orbit. The orbital plane
- is performed
by construction equipment called milling machines
or cold planers
. These machines
use a large rotating
drum to remove
- —which propound
the idea of a whole series
of subtle planes
which, from a center
, interpenetrate themselves
and the physical
- geometry, a triangle center
centre) is a point
in the plane
that is in some sense
of a triangle
akin to the centers
- \theta \in [0,\pi ]\}} of positive radius
in the upper
at the origin. If the function
f is of the form f ( z ) = e i a z g...
- /kɑːrˈtiʒən/) is a coordinate system
each point uniquely
in a plane
by a set of numerical
are the signed distances
Recent Searches ...
Related images to Planer centers