- of the
residual lignin,
hence the
process is
often referred to as
delignification.
Sodium hypochlorite (household bleach) was
initially used to bleach...
-
denture cleaning.
Alkali metal salts of H 2SO 5 show
promise for the
delignification of wood. It is also used in
laboratories as a last
resort in removing...
- 2008.01402.x. ISSN 1365-2435. Blanchette,
Robert (September 1991). "
Delignification by Wood-Decay Fungi".
Annual Review of Phytopathology. 29: 281–403...
- rate of
delignification in
kraft pulping. It is a
single variable model combining temperature (T) and time (t) and ****uming that the
delignification is one...
- with the
largest producing more than 3,500
tonnes per day. Typically,
delignification requires around two
hours at 170 to 176 °C (338 to 349 °F).
Under digesting...
-
removing all of the
lignin called the
delignification process. The
production of
transparent wood from the
delignification process vary
study by study. However...
-
Dimethyl sulfide is
emitted by
kraft pulping mills as a side
product from
delignification.
Dimethyl sulfide is
normally present at very low
levels in healthy...
-
miscible co-solvent in
aqueous solution to aid in the
liquefaction and
delignification of
plant lignocellulosic biom**** for
production of
renewable platform...
- Adaskaveg, J. E. 1986.
Studies of
Ganoderma lucidum and
Ganoderma tsugae (
Delignification,
Mating Systems, Root Rot,
Cultural Morphology, Taxonomy). Dissertation...
- treatment.
There are
three categories of
bleaching methods:
Bleaching by
delignification using chlorine gas,
which is a
method that has been
largely replaced...
