- car (RB5)
which used
pullrod suspension at the rear, the
first car to do so
since the
Minardi PS01 in 2001.
Ferrari used a
pullrod suspension at both the...
- a
flatter concept compared to
other 2014 cars.
Ferrari retained their pullrod front suspension,
despite reports that it
would be dropped. The rear was...
-
specifications Ch****is
Aluminium Monocoque Suspension (front)
Pullrod double wishbone Suspension (rear)
Pullrod double wishbone Axle
track Front: 1,549 mm (61.0 in)...
-
Ducati has
produced the
following motorcycle engine types: Single-cylinder,
pullrod actuated, 48 cc and 65 cc (Cucciolo)
pushrod actuated, 98 and 125 cc two-stroke...
- Ch****is
Carbon fibre composite Suspension (front)
Carbon fibre and
titanium pullrod suspension legs
operating inboard torsion bar and
damper system Suspension...
-
Kevlar and
carbon composite monocoque Suspension (front)
Double wishbone pullrod operated inboard Bilstein spring dampers.
Suspension (rear)
Double wishbone...
- F2012
featured a
pullrod front suspension,
which had not been seen in
Formula One
since the 2001
Minardi PS01 and
Arrows A22 cars. A
pullrod rear suspension...
- pushrod-activated
springs and
dampers Suspension (rear)
Carbon fibre wishbone and
pullrod-activated
inboard springs and
dampers Length over 5,000 mm (197 in) Width...
- pushrod-activated
springs and
dampers Suspension (rear)
Carbon fibre wishbone and
pullrod-activated
inboard springs and
dampers Length over 5,000 mm (197 in) Width...
- Murciélago concept. "Suspension". Formula1.com.
Retrieved 2019-05-30. "Pushrod-
Pullrod". www.formula1-dictionary.net.
Retrieved 2019-05-31. Newey,
Adrian (2017)...