-
between thermal transfer surfaces, such as
between microprocessors and
heatsinks, in
order to
increase thermal transfer efficiency. It has a
higher thermal...
-
metal case.
Inexpensive fan-cooled
aluminium heatsinks are
often used on
standard desktop computers.
Heatsinks with
copper base-plates, or made of copper...
-
distance between the ****-holes for the
heatsink is 72 mm. Such heat-sinks are not
interchangeable with
heatsinks for
sockets that have a
distance of 75...
- sockets.
Heatsinks were
commonly attached directly to the CPU socket, but some
motherboards also had 4
holes for
fastening bigger heatsinks to the motherboard...
- 2010-04-04. "Copper
heatsinks". Cooliance.
Archived from the
original on 2014-10-11. "
Heatsink Design and Selection: Material". ABL
Heatsinks. Sergent, J.;...
-
updated mounting-kit for one of the higher-end
solutions on the market. For
heatsinks to be interchangeable, not only the hole pattern, but also the socket...
- double-sided tape. It is
commonly used to bond
integrated circuits to
heatsinks where there are no
other mounting mechanisms available. The glue is typically...
- dual-channel
configuration The AM4
socket specifies the 4
holes for
fastening the
heatsink to the
motherboard to be
placed in the
corners of a
rectangle with a lateral...
-
underside of
heatsinks to aid the
conduction of heat away from the
component being cooled (such as a CPU or
another chip) and into the
heatsink (usually made...
- SR9,
Number Nine's last, best S3 card, none of
these video cards had
heatsinks on the
graphics processing chip (GPU). The S3-based
video cards were,...
