Definition of Diametre. Meaning of Diametre. Synonyms of Diametre

Here you will find one or more explanations in English for the word Diametre. Also in the bottom left of the page several parts of wikipedia pages related to the word Diametre and, of course, Diametre synonyms and on the right images related to the word Diametre.

Definition of Diametre

No result for Diametre. Showing similar results...

Meaning of Diametre from wikipedia

- In geometry, a diameter of a circle is any straight line segment that p****es through the centre of the circle and whose endpoints lie on the circle. It...
- "NPS". The European and international designation equivalent to NPS is DN (diamètre nominal/nominal diameter/Nennweite), in which sizes are measured in millimetres...
- agreement with the European Space Agency for the installation of a 35-m diametre antenna and other mission support facilities at the Pierre Auger Observatory...
- horlogers n'utilisent pas le millimètre mais la ligne pour désigner le diamètre d'encageage d'un mouvement. [By ancestral tradition, watchmakers do not...
- The nominal size is a Renard series. Nominal diameter, abbreviated DN (diamètre nominal/Durchmesser nach Norm), is the designation system specified by...
- notes while the bigger drumhead, which can be from 7.5 to 10 inches in diametre, is made for low pitch. The two drumheads allow a combination of b**** and...
- 9 in) in diametre, and have a surface area of 0.048 m2 (0.52 sq ft). However, if it were broken up into spherical dust particles 50 μm in diametre (about...
- dont la section couvrirait une surface arrondie de 10 a 14 centimetres de diametre; la profondeur est generalement de 3 a 5 centimetres. [better source needed]...
- February 2021. "Le Mans '99". bmw-grouparchiv.de. Retrieved 9 June 2019. "Diamètre des brides / Air rectrictors diameter" (PDF). lemans-history.com. Retrieved...
- double or semi-double, reddish or pink flowers 5–6 cm (2.0–2.4 in) in diametre, Rosa roxburghii f. normalis Rehder & E. H. Wilson (in Sargent, Pl. Wilson...