Definition of Breechface. Meaning of Breechface. Synonyms of Breechface

Here you will find one or more explanations in English for the word Breechface. Also in the bottom left of the page several parts of wikipedia pages related to the word Breechface and, of course, Breechface synonyms and on the right images related to the word Breechface.

Definition of Breechface

No result for Breechface. Showing similar results...

Meaning of Breechface from wikipedia

- The breechface is the front part of the breechblock that makes contact with the cartridge in a firearm. The breech block (or breechblock) in a gun is what...
- completely new case design with no parent case, but has approximately the same breechface diameter (14.73 mm; 0.580 in) as the .378 Weatherby Magnum, but without...
- The 7.5×54mm French MAS has an uncommon 12.39 mm (0.488 in) breech and breechface diameter, and it has ballistics comparable to the 7.62×51mm NATO/.308...
- Barrel length is measured from the end of the muzzle to the front of the breechface, typically by inserting a measuring rod into the barrel. Barrel length...
- registration). Barrel lengths of less than 18 inches (46 cm) as measured from the breechface to the muzzle when the weapon is in battery, or have an overall length...
- 66 feet (20 m) long (50 times their 16-inch bore, or 50 calibers from breechface to muzzle). About 43 feet (13 m) protrudes from the gun house. Each gun...
- are engraved, using a laser, on the tip of the firing pin and on the breechface of the firearm. When the gun is fired, these etchings may be transferred...
- (20 m) long - 50 times their 16-inch(406mm) bore, or 50 calibers, from breechface to muzzle. About 43 feet (13 m) protruded from the gun house. Each gun...
- 32 m) long—50 times their 16-inch (406 mm) bore, or 50 calibers from breechface to muzzle. With a full powder charge of 700 pounds (320 kg), the guns...
- 2 mm 1-1/4"-16 BAT EX with CHEY-TAC breechface M38.10 1.588 mm 60° 37.34 mm 1-1/2"-16 BAT EX with 50 BMG breechface M38.10 1.588 mm 60° 34.80 mm 1-1/2"-16...