-
interrupts. Some
interrupt signals are not
affected by the
interrupt mask and
therefore cannot be disabled;
these are
called non-maskable
interrupts (NMIs)...
-
Message Signaled Interrupts (MSI) are a
method of
signaling interrupts,
using special in-band
messages to
replace traditional out-of-band
signals on dedicated...
- Look up
interruption in Wiktionary, the free dictionary.
Interruption may
refer to:
Interruption (speech), a
speech event when one
person breaks in to...
-
hardware interrupts. If the flag is set to 1
maskable interrupts are enabled. If
reset (set to 0) such
interrupts will be
disabled until interrupts are enabled...
- An
interrupter in
electrical engineering is a
device used to
interrupt the flow of a
steady direct current for the
purpose of
converting a
steady current...
-
nested interrupts, a
handler is
often reached with all
interrupts globally masked by a CPU
hardware operation. In this architecture, an
interrupt handler...
-
specifies which interrupts have been acknowledged, but are
still waiting for an end of
interrupt (EOI). The IMR
specifies which interrupts are to be ignored...
-
running program and
allows a
special program, an
interrupt handler, to run instead.
Hardware interrupts are used to
handle events such as
receiving data...
- line
carriers in
which a
telephone operator, by
request of a caller,
interrupts an
existing phone conversation between other parties. This is especially...
- non-maskable
interrupt (NMI),
despite having the
highest priority among interrupts, can be
prevented from
occurring through the use of an
interrupt mask. An...
