Definition of Warpage. Meaning of Warpage. Synonyms of Warpage

Here you will find one or more explanations in English for the word Warpage. Also in the bottom left of the page several parts of wikipedia pages related to the word Warpage and, of course, Warpage synonyms and on the right images related to the word Warpage.

Definition of Warpage

Warpage
Warpage Warp"age, n. The act of warping; also, a charge per ton made on shipping in some harbors.

Meaning of Warpage from wikipedia

- Out-of-plane warpage is especially of interest at the component level of electronics packaging for solder joint reliability quantification. Excessive warpage during...
- Moldflow Insight which provides definitive results for flow, cooling, and warpage along with support for specialized molding processes. In addition, Autodesk...
- Flammability Toxicity Resistance to chemicals Card dimensional stability and warpage with temperature and humidity Resistance to deterioration from exposure...
- the sweep as it cools. A highly skilled welder can remove significant warpage this way. Steel weldments are occasionally annealed in a low-temperature...
- of Injection Molding Process – How Injection Molding Works Shrinkage & warpage Manufacturing engineering and mechanical properties of plastic parts –...
- Mica-reinforced plastics also have high-heat dimensional stability, reduced warpage, and the best surface properties of any filled plastic composite. In 2008...
- the package then heating during reflow can lead to excessive component warpage. This often results in the corners of the component lifting off the printed...
- oxyacetylene gas torch welding was seldom used to weld sheetmetal, since warpage was a byproduct besides the excess heat. Automotive body repair methods...
- flooding.[citation needed] Almost all Quadrajets today have some amount of warpage of the castings[citation needed] although less pronounced in the so-called...
- Improved surface finish without defects Avoiding warpage by uniform mold surface temperature (warpage caused by nonuniform cooling) Long mold life Cavity...
Loading...