- symbols, as in "
mTorr" (millitorr) or "Torr⋅L/s" (torr-litres per second). The
symbol (uppercase)
should be used with
prefix symbols (thus,
mTorr and millitorr...
- P/(P + P0) with
respect to the
partial pressure of the adsorbate. P0 = 100
mTorr. The
graph shows levelling off of the
surface coverage at
pressures higher...
- microwave[citation needed] The
pressure they
operate at—vacuum
pressure (< 10
mTorr or 1 Pa),
moderate pressure (≈1 Torr or 100 Pa),
atmospheric pressure (760 Torr...
- The gas is
typically hydrogen or
deuterium at a
pressure of 300 to 500
mTorr (40 to 70 Pa).
Commercial thyratrons also
contain a
titanium hydride reservoir...
- (atm)
manometric units: centimetre, inch,
millimetre (torr) and
micrometre (
mTorr, micron) of mercury,
height of
equivalent column of water,
including millimetre...
- 273 K)
Boiling point ~ 130 to 150 °C (266 to 302 °F; 403 to 423 K) at 30
mTorr Solubility in
water Degrades in
water to form Sn(IV)
Hazards Flash point...
-
miniaturized m****
analyzers due to
their high sensitivity,
tolerance for
mTorr pressure, and
capabilities for
single analyzer tandem m**** spectrometry...
-
Inductively coupled plasma source powered with RF 13.56 MHz and
operating at 6
mTorr of H2. The
value of the electron-suppressor
voltage (accelerating the ions)...
- two states.
Since the mid-1980s most 3D
traps (Paul traps) have used ~1
mTorr of helium. The use of
damping gas and the m****-selective
instability mode...
- the ions are created. In
vacuum MALDI, ions are
typically produced at 10
mTorr or less
while in AP-MALDI ions are
formed in
atmospheric pressure. In the...
