- ToneBurst/Mini
DiSEqC techniques.
DiSEqC is also
compatible with the
actuators used to
rotate large C band
dishes if used with a
DiSEqC positioner.
DiSEqC uses...
-
central alignment with the
broadcasting satellite, but
DiSEqC switches are
faster than
DiSEqC motors as no
physical movement is required.[citation needed]...
-
Satellites Automatic Location System (USALS), also
known (unofficially) as
DiSEqC 1.3, Go X or Go to XX is a
satellite dish
motor protocol that automatically...
- The user
selects the LNB type,
local oscillator frequency,
appropriate DiSEqC switch port, and
motor configuration. If all the
settings are
correct for...
-
automatically addressed with any
DiSEqC 1.0 or
higher receiver. In some cases, they can also be
addressed with ToneBurst/Mini
DiSEqC. However, they are only available...
-
bandwidth of a
single transponder on the satellite)
selected according to a
DiSEqC-compliant
command from the receiver, to
output at a
fixed frequency in the...
-
receive a
specific "channel". This is
handled by the
receiver using the
DiSEqC protocol to
control the LNB mode. If
several satellite receivers are to...
- the Flex
connector is
poorly installed. F
connectors attached to a 4-way
DiSEqC switch. A
visual collection of
standard and right-angle
coaxial F connectors...
-
satellites at 28° East will
require a
separate feed and a
DiSEqC or
Multiswitch with a
Diseqc compatible receiver. 2rn
state that a dish of 1
metre (40")...
-
parameters such as the
signal source (typically the
satellite number in a
DiSEqC switch), frequency, polarisation,
Modulation system and type, the wanted...
